Brother HL-1112 Driver

The Brother HL-1112 printer boasts specifications that are comparable to its HL-1110 counterpart, thanks to its electrophotographic laser print technology. Notably, it can operate within a power source range of 110 to 120 volts of AC with a frequency of 50/60 Hz, while those in Chile and Argentina can enjoy a voltage range of 220 to 240 volts at the same rate.

To support its impressive performance, the printer is equipped with an internal memory of approximately 1 MB of RAM. This provides ample support for its inbuilt processor to produce high-quality prints.

Specifications

The energy consumption of this device is determined by its ongoing process or state. At its peak performance, it requires up to 1044 watts of power, with the exception of Chile and Argentina, where it measures up to 1056 watts. During the printing process, it can use up to 380 watts at a temperature of 25⁰C. In immediate mode, it uses up to 40 watts at the same temperature. Meanwhile, when in deep sleep mode, it consumes as low as 0.5 watts. The device consumes the least energy when it is off but still connected to a power source, with an approximate consumption of 0.28 watts.

The measured physical dimensions of the printer include a height of about 189 mm, a depth of 238 mm and a width of 340 mm. The weight of the Brother HL-1112 printer, however, is about 4.5 kg which is equivalent to about 9.9 lbs. The connectivity options for the device is through the standard choice of a full speed USB 2.0 port but requires a standard cable that is not longer than 2 meters.

For optimal performance, it is recommended that the temperature range for operating this printer be maintained between 10 and 32.5⁰C, while storage temperatures should be within the range of 0 to 40⁰C. When in use, the humidity should be between 20 and 80% without condensation, whereas for storage purposes, it should be between 10 and 90%.

To download the driver for your Brother HL-1112 printer, please visit the Brother website.